The Best Milwaukee Cordless Drill Reviews Guide for 2017

Our Guide to The Best Milwaukee Cordless Tools on The Market

Milwaukee is a legend in the power tools industry. The worldwide entity started their path to greatness in 1924, and the company continues to innovate power tools today. Offering a variety of power tools, the company is best known for their cordless drills, which are top-of-the-line models.

Milwaukee 2407-20 M12 3/8 Drill Driver – Bare

Our favorite for 2017

Milwaukee 2606-20 M18 1/2″ Drill Driver

A great value option

Milwaukee 2407-22 M12 3/8 Drill Driver Kit

A fabulous drill driver kit

The company works with real craftsmen to produce some of the industry’s most advanced drills.

We’re going to research and review a few of the best drills in the company’s lineup, and when you go to compare them, you’ll want to keep the following points in mind to help you narrow down your choices:

  • Right Angle vs Standard: The right angle drill isn’t a staple in most tool boxes, but it offers its own benefits. These drill types are ideal for tight spaces, such as behind beams, and most models have three speeds. With extensions, these models can reach into very tight spaces, too.
  • Bare-tool vs Kit: A bare-tool is a good option if you have a battery and charger. Otherwise, a kit will allow you to get started with your drilling without spending any extra money in the process.
  • Speeds: A model with a variety of speeds is the ideal choice. You’ll normally find two speeds, and they’ll often range up to 400 rpms and 1,000+ rpm. There are times when you don’t want to use too high of speeds for precision reasons, but for quick jobs, faster speeds can be beneficial. Faster isn’t always better when it comes to drills, so it’s great when you have two speed options offered.

Reviews of the Best Cordless Drill from Milwaukee

Milwaukee 2407-20 M12 3/8 Drill Driver Review – The 2407-20 is a very affordable, bare tool that is one of the best general usage drills on the market. This model uses a 3/8” chuck, and it’s able to produce 275 in. lbs. of torque. Backed by a 5-year warranty, you’ll need to buy your own charger and battery.

The M12 offers an LED light and has dual speeds: 0 – 400 rpm and 0 – 1,500 rpm.

An onboard battery gauge tells you when it’s time to recharge the battery, and the handle has been redesigned with an ergonomic grip for added comfort. The length of the drill is 7-3/8” and has a weight of 2.1 pounds.

Bare-Tool Milwaukee 2415-20 M12 12-Volt Review – This bare-tool is a right angle drill/driver, and it’s 3/8” single sleeve ratcheting chuck will tighten bits quickly. This model has an extended paddle to allow for a multitude of practical uses, and there is an electronic clutch with 11 settings plus a drill mode.

The built-in LED will illuminate your workspace.

A battery gauge is present, and you’ll need to buy a battery since this is a bare-tool. The head of the unit is just 3.75”, and this drill is able to produce 100 in. lbs. torque. Lightweight and compact, the right angle design makes this an addition to your toolbox that will work best for jobs that require drilling in tight spaces.

Milwaukee 2407-22 M12 3/8 Drill Driver Kit Review – This is a complete kit by Milwaukee, and it is a good choice for anyone who wants to take their drill out of the box and start using it immediately. The battery and charger are included, and this model can produce 275 in. lbs. of torque.

For maximum durability, the unit features a metal ratcheting chuck.

The handle is redesigned for ergonomic comfort, and there is an onboard battery gauge, too. The weight of this drill is just 2 pounds, and the dimensions are 13.8” x 3.7” x 11.4”. Two batteries are included, and the run time is 1.5 hours per battery.

Milwaukee 2606-20 M18 1/2″ Drill Driver Review – The 2606-20 is an all-metal drill that has a 1/2” metal chuck and offers two speed options: 0 – 400 rpm and 0 – 1,800 RPM. This is a heavy-duty drill, and the torque of this model is a staggering 500 in. lbs., so it’s at the top-end of the torque charts.

A 4-pole frameless motor is featured, and rare-earth magnets allow for an easy hold on screws and bolts.

Compact in design, this model’s dimensions are 7.5” x 2.8” x 7.5”. The weight of the unit is 2.7 pounds, and this battery-powered model runs off 18 volts. This is a drill that you need for heavy duty jobs, and would be one most contractors use.

Milwaukee M18 18V Lithium-Ion 1/2 Inch Cordless Drill Driver Review – This model is the 2606-12CT, and it’s a 4-pole frameless motor model, too. Much like our previous choice, this model has 500 in. lbs. of torque, and it has two speeds: 0 – 400 rpm and 0 – 1,800 rpm.

Overload protection is built-in to ensure the motor doesn’t get overworked, and the battery offers 20% higher speeds and torque and 40% more run-time.

A hard case and one battery are included, and there is a fuel gauge. The unit can also operate at 0 degrees or -18C – so it can be used in extreme weather conditions. This model uses 1/2″ bits, and it is a heavier weight at 8.4 pounds.

Buyer’s Guide –  How to Choose the Right Milwaukee Cord Less Drill for You

You’ve just learned about some of the best cordless drills in the Milwaukee lineup. If you’re wondering which model is the right one for you, you’re not alone. A lot of people wonder which model they’ll need.

Milwaukee Cordless Drill

And there isn’t a clear answer.

Contractors will often try to compare Milwaukee vs Makita – or any other company – but the truth is that one drill may not be used for all jobs. A wired drill may be used for intensive jobs, and a smaller drill may be used for jobs where space is very limited.

There’s a lot to consider, so where do you even begin?

  • Reviews: If you don’t read through user reviews, you’re leaving out one of your most important forms of research. Reviews will provide you with an inside look into the drill, and this means knowing which projects the drill works best for, and which projects the drill simply fails at when in use.
  • Heavy-Duty or Standard: A heavy-duty drill is often heavier, making it tiring on the shoulders and arms. However, these models are designed for more intensive use, which would be found in the field.
  • Size: The size of a drill is very noticeable when it’s too large to fit in tight corners or spaces. If you want to be able to drill between rafters, you’ll need a smaller drill to get the job done. Keep the size in mind, with a focus on your usage. Weight will matter, too so that you don’t get too tired when holding your drill on the job.



Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>